DescriptionEnvironment Variable
All Watchdog System Monitor (IOSWDSysMon)
Subevents
A value to indicate whether subevent 1 or subevent
2 is present. A value of 1 means that the subevent is
present; a value of 0 means that the subevent is not
present.
_ioswd_sub1_present _ioswd_sub2_present
The event type, either cpu_proc or mem_proc._ioswd_sub1_type _ioswd_sub2_type
Watchdog System Monitor (IOSWDSysMon)
cpu_proc Subevents
A process name of subevents._ioswd_sub1_path _ioswd_sub2_path
The time period, in seconds and optional milliseconds,
used for measurement in subevents.
_ioswd_sub1_period _ioswd_sub2_period
The process identifier of subevents._ioswd_sub1_pid _ioswd_sub2_pid
The task name of subevents._ioswd_sub1_taskname _ioswd_sub2_taskname
The CPU utilization of subevents measured as a
percentage.
_ioswd_sub1_value _ioswd_sub2_value
Watchdog System Monitor (IOSWDSysMon)
mem_proc Subevents
A percentage value of the difference that triggered
the event.
This variable is set only when the
_ioswd_sub1_is_percent or
_ioswd_sub2_is_percent variable contains
a value of 1.
Note
_ioswd_sub1_diff _ioswd_sub2_diff
A number that identifies whether the value is a
percentage. A value of 0 means that the value is not
a percentage; a value of 1 means that the value is a
percentage.
_ioswd_sub1_is_percent _ioswd_sub2_is_percent
The process name of subevents._ioswd_sub1_path _ioswd_sub2_path
The process identifier of subevents._ioswd_sub1_pid _ioswd_sub2_pid
The task name of subevents._ioswd_sub1_taskname _ioswd_sub2_taskname
The CPU utilization of subevents measured as a
percentage.
_ioswd_sub1_value _ioswd_sub2_value
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1693
Information About Writing EEM Policies Using the Cisco IOS CLI