Cisco Catalyst 2960 Series User Manual

12.312.212.112.011.311.211.111.0DescriptionCause
Codes
The
equipment
that is
sending
this code
does not
wish to
accept this
call
although it
could have
accepted
the call
because the
equipment
that is
sending
this code is
neither
busy nor
incompatible.
This code
may also
be
generated
by the
network,
indicating
that the call
was cleared
due to a
supplementary
service
constraint.
The
diagnostic
field may
contain
additional
information
about the
supplementary
service and
reason for
rejection.
This code
applies to
ISDN or
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
859
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000