Cisco Catalyst 2960 Series User Manual

DescriptionCommand
Displays information about neighbors, including
device type, interface type and number, holdtime
settings, capabilities, and port ID.
You can limit the display to neighbors of a specific
interface or expand the display for more detailed
information.
show lldp neighbors [interface-id] [detail]
Displays LLDP counters, including the number of
packets sent and received, number of packets
discarded, and number of unrecognized TLVs.
show lldp traffic
Displays the location information for the specified
administrative tag or site.
show location admin-tag string
Displays the location information for a specific global
civic location.
show location civic-location identifier id
Displays the location information for an emergency
location
show location elin-location identifier id
Displays the configured network-policy profiles.show network-policy profile
Displays the NMSP informationshow nmsp
Additional References for LLDP, LLDP-MED, and Wired Location Service
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
All supported MIBs for this release.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
75
Additional References for LLDP, LLDP-MED, and Wired Location Service

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000