Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesyesyesnoIndicates that
no callback
verification
is required.
The only
valid value
for this
parameter is
1 (for
example,
nocallback-verify=1).
Used with
service=arap,
service=slip,
service=ppp,
service=shell.
There is no
authentication
on callback.
Not valid for
ISDN.
nocallback-verify
yesyesyesyesyesyesyesPrevents user
from using
an escape
character.
Used with
service=shell.
Can be either
true or false
(for
example,
noescape=true).
noescape=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
798
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000