Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoThis is an
authorization
attribute and
defines
whether
L2TP should
perform
UDP
checksums
for data
packets.
Valid values
are “yes” and
“no.” The
default is no.
Used with
service=ppp
and
protocol=vpdn.
l2tp-udp-
checksum
yesyesyesyesnononoDefines
whether to
turn on or
turn off
“stac”
compression
over a PPP
link. Used
with
service=ppp.
Link
compression
is defined as
a numeric
value as
follows:
•
0:
None
•
1: Stac
•
2:
Stac-Draft-9
•
3:
MS-Stac
link-
compression=
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
795
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000