Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoSpecifies the
password
that the NAS
needs to
respond to a
chap/pap
request from
the remote
end of a
connection
on an
outgoing
call. Used
with
service=ppp
and
protocol=ip.
send-secret
yesyesyesyesyesyesyesThe primary
service.
Specifying a
service
attribute
indicates that
this is a
request for
authorization
or
accounting
of that
service.
Current
values are
slip, ppp,
arap, shell,
tty-daemon,
connection,
and system.
This attribute
must always
be included.
service=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
812
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000