Result String
None
Set _cerrno
No
Event_reqinfo
"event_id %u event_type %u event_type_string {%s} %u event_pub_sec %u event_pub_msec %u
event_severity {%s}" "oid {%s} request {%s} request_type {%s} value %u"
DescriptionEvent Type
Unique number that indicates the ID for this published
event. Multiple policies may be run for the same
event, and each policy will have the same event_id.
event_id
Type of event.event_type
An ASCII string that represents the name of the event
for this event type.
event_type_string
The time, in seconds and milliseconds, when the event
was published to the EEM.
event_pub_sec event_pub_msec
The severity of the event.event_severity
The ID of the SNMP object in the received get or set
request.
oid
The get or set request type.request
The type of request (exact or next).request_type
For set requests only. The value to set the object to.value
event_register_syslog
Registers for a syslog event. Use this Tcl command extension to trigger a policy when a syslog message of a
specific pattern is logged after a certain number of occurrences during a certain period of time.
Syntax
event_register_syslog [tag ?] [occurs ?] [period ?] pattern ?
[priority all|emergencies|alerts|critical|errors|warnings|notifications|
informational|debugging|0|1|2|3|4|5|6|7]
[queue_priority low|normal|high|last]
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1944
event_register_syslog
To Next Page
Loading...
Need help?
General
