Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesnononononoDetermines
whether the
network
access server
uses only the
56 K portion
of a channel,
even when
all 64 K
appear to be
available. To
turn on this
attribute, use
the “true”
value
(force-56=true).
Any other
value is
treated as
false. Used
with the
service=outbound
and
protocol=ip.
force-56
yesyesyesyesyesnonoSpecifies the
password for
the home
gateway
during the
L2F tunnel
authentication.
Used with
service=ppp
and
protocol=vpdn.
gw-password
yesyesyesyesyesyesnoSets a value,
in minutes,
after which
an idle
session is
terminated.
A value of
zero
indicates no
timeout.
idletime=x
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
788
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000