Cisco Catalyst 2960 Series User Manual

PurposeCommand or Action
spaces but ignores leading spaces. By default, no password is
defined.
Returns to privileged EXEC mode.end
Example:
Switch(config-line)# end
Step 5
Verifies your entries.show running-config
Example:
Switch# show running-config
Step 6
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config
Step 7
startup-config
Related Topics
Preventing Unauthorized Access, on page 753
Terminal Line Telnet Configuration, on page 757
Example: Setting a Telnet Password for a Terminal Line, on page 772
Configuring Username and Password Pairs
Follow these steps to configure username and password pairs:
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
765
How to Control Switch Access with Passwords and Privilege Levels

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000