Cisco Catalyst 2960 Series

Password CreatedPassword
Configured
UsernameUsername Format
(Group Size,
Separator)
MAC Address
PasswordPassword08002b8619de(12, <not
applicable>)
08002b8619de
How to Configure MAC Authentication Bypass
Enabling MAC Authentication Bypass
Perform this task to enable the MAC Authentication Bypass feature on an 802.1X port.
SUMMARY STEPS
1.
enable
2.
configure terminal
3.
interface type slot / port
4.
mab
5.
end
6.
show authentication sessions interface type slot / port details
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode.enable
Step 1
Example:
Device> enable
•
Enter your password if prompted.
Enters global configuration mode.configure terminal
Example:
Device# configure terminal
Step 2
Enters interface configuration mode.
interface type slot / port
Example:
Device(config)# interface Gigabitethernet 1/2/1
Step 3
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1044
How to Configure MAC Authentication Bypass