Cisco Catalyst 2960 Series User Manual

DescriptionAttributeSub-Type NumberVendor-Specific
Company Code
Number
Specifies the reason a
connection was taken
offline per Q.931
specification.
Disconnect-Cause
(h323-disconnect-cause)
30926
Specifies the impairment
factor (ICPIF) affecting
voice quality for a call.
Voice-Quality
(h323-voice-quality)
31926
Indicates the name of the
underlying gateway.
Gateway-ID
(h323-gw-id)
33926
Large Scale Dialout Attributes
Defines a dialing string to
be used for callback.
callback-dialstring1926
No description available.data-service1926
Defines the number to dial.dial-number1926
Determines whether the
network access server uses
only the 56 K portion of a
channel, even when all 64
K appear to be available.
force-561926
Allows the user profile to
reference information
configured in a map class
of the same name on the
network access server that
dials out.
map-class1926
Defines the protocol to use
(PAP or CHAP) for
username-password
authentication following
CLID authentication.
send-auth1926
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
914
Information about RADIUS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000