Cisco Catalyst 2960 Series User Manual

Result String
rec_list {{process info string 0}, {process info string 1},...}
Where each process info string is the same as the result string of the sysreq_info_proc Tcl command extension.
Set _cerrno
Yes
sys_reqinfo_routername
Queries the device name.
Syntax
sys_reqinfo_routername
Arguments
None
Result String
routername %s
Where routername is the name of the device.
Set _cerrno
Yes
sys_reqinfo_snmp
Queries the value of the entity specified by a Simple Network Management Protocol (SNMP) object ID.
Syntax
sys_reqinfo_snmp oid ? get_type exact|next
Arguments
(Mandatory) SNMP OID in dot notation (for example,
1.3.6.1.2.1.2.1.0).
oid
(Mandatory) Type of SNMP get operation that needs
to be applied to the specified oid. If the get_type is
"exact," the value of the specified oid is retrieved; if
the get_type is "next," the value of the lexicographical
successor to the specified oid is retrieved.
get_type
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2004
sys_reqinfo_routername

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000