Cisco Catalyst 2960 Series User Manual

CHAPTER 64
Administering the System
•
Information About Administering the Switch, page 1523
•
How to Administer the Switch, page 1531
•
Monitoring and Maintaining Administration of the Switch, page 1553
•
Configuration Examples for Switch Administration, page 1554
•
Additional References for Switch Administration , page 1556
•
Feature History and Information for Switch Administration, page 1557
Information About Administering the Switch
System Time and Date Management
You can manage the system time and date on your switch using automatic configuration methods (RTC and
NTP), or manual configuration methods.
For complete syntax and usage information for the commands used in this section, see the Cisco IOS
Configuration Fundamentals Command Referenceon Cisco.com.
Note
System Clock
The basis of the time service is the system clock. This clock runs from the moment the system starts up and
keeps track of the date and time.
The system clock can then be set from these sources:
•
RTC
•
NTP
•
Manual configuration
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1523

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000