Cisco Catalyst 2960 Series User Manual

event_register_timer
Creates a timer and registers for a timer event as both a publisher and a subscriber. Use this Tcl command
extension when there is a need to trigger a policy that is time specific or timer based. This event timer is both
an event publisher and a subscriber. The publisher part indicates the conditions under which the named timer
is to go off. The subscriber part identifies the name of the timer to which the event is subscribing.
Both the CRON and absolute time specifications work on local time.Note
Syntax
event_register_timer [tag ?] watchdog|countdown|absolute|cron
[name ?] [cron_entry ?]
[time ?]
[queue_priority low|normal|high|last] [maxrun ?]
[nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
(Mandatory) Watchdog timer.watchdog
(Mandatory) Countdown timer.countdown
(Mandatory) Absolute timer.absolute
(Mandatory) CRON timer.cron
(Optional) Name of the timer.name
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1948
event_register_timer

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000