Cisco Catalyst 2960 Series User Manual

(Optional) The time period for the number of events
that have occurred (specified in
SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the most
recent sample is used.
period
3. cpu_proc [procname ?] [op gt|ge|eq|ne|lt|le] [val ?] [period ?]
Arguments
(Optional) A regular expression that specifies the
process name that you wish to monitor for CPU
utilization conditions.
procname
(Optional) Comparison operator used to compare the
collected CPU usage sample percentage with the
specified percentage value; if true, an event will be
raised.
op
(Optional) The percentage value with which the
average CPU usage during the sample period should
be compared.
val
(Optional) The time period for averaging the
collection of samples (specified in
SSSSSSSSSS[.MMM] format, where SSSSSSSSSS
must be an integer representing seconds between 0
and 4294967295, inclusive, and where MMM must
be an integer representing milliseconds between 0
and 999). If this argument is not specified, the most
recent sample is used.
period
4. cpu_tot [op gt|ge|eq|ne|lt|le] [val ?] [period ?]
Arguments
(Optional) Comparison operator used to compare the
collected total system CPU usage sample percentage
with the specified percentage value; if true, an event
will be raised.
op
(Optional) The percentage value with which the
average CPU usage during the sample period should
be compared.
val
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1962
event_register_wdsysmon

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000