Auto Identity Class Maps Templates
The following built-in class maps are supported by the Auto Identity feature:
• AI_NRH—Specifies that the nonresponsive host (NRH) authentication method is enabled.
• AI_WEBAUTH_METHOD—Specifies that the web authentication method is enabled.
• AI_WEBAUTH_FAILED—Specifies that the web authentication method failed to authenticate.
• AI_WEBAUTH_NO_RESP—Specifies that the web authentication client failed to respond.
• AI_DOT1X_METHOD—Specifies that the dot1x method is enabled.
• AI_DOT1X_FAILED—Specifies that the dot1x method failed to authenticate.
• AI_DOT1X_NO_RESP—Specifies that the dot1x client failed to respond.
• AI_DOT1X_TIMEOUT—Specifies that the dot1x client stopped responding after the initial acknowledge
(ACK) request.
• AI_MAB_METHOD—Specifies that the MAC Authentication Bypass (MAB) method is enabled.
• AI_MAB_FAILED—Specifies that the MAB method failed to authenticate.
• AI_AAA_SVR_DOWN_AUTHD_HOST—Specifies that the Authentication, Authorization, and
Accounting (AAA) server is down, and the client is in authorized state.
• AI_AAA_SVR_DOWN_UNAUTHD_HOST—Specifies that the AAA server is down, and the client
is in authorized state.
• AI_IN_CRITICAL_AUTH—Specifies that the critical authentication service template is applied.
• AI_NOT_IN_CRITICAL_AUTH—Specifies that the critical authentication service template is not
applied.
• AI_METHOD_DOT1X_DEVICE_PHONE—Specifies that the method is dot1x and the device type is
IP phone.
• AI_DEVICE_PHONE—Specifies that the device type is IP phone.
Auto Identity Parameter Maps
The following built-in parameter map templates are supported by the Auto Identity feature:
• AI_NRH_PMAP—Starts nonresponsive host (NRH) authentication.
AI_WEBAUTH_PMAP—Starts web authentication.
Auto Identity Service Templates
Service templates are available inside builit-in policy maps. The following built-in service templates are
supported by the Auto Identity feature:
• AI_INACTIVE_TIMER—Template to start the inactivity timer.
• AI_CRITICAL_ACL—Dummy template; users can configure this template as per their requirements.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1456
Auto Identity
To Next Page
Loading...
Need help?
General
