Cisco Catalyst 2960 Series User Manual

12.212.112.011.311.211.111.0DescriptionAttribute
yesyesyesyesyesyesyesSpecifies
whether
routing
information
is to be
propagated
to and
accepted
from this
interface.
Used with
service=slip,
service=ppp,
and
protocol=ip.
Equivalent in
function to
the /routing
flag in SLIP
and PPP
commands.
Can either be
true or false
(for
example,
routing=true).
routing=x
yesyesyesyesnononoSpecifies an
input access
list definition
to be
installed and
applied to
routing
updates on
the current
interface for
the duration
of the
current
connection.
Used with
service=ppp
and
protocol=ip,
and with
service=ppp
and
protocol=ipx.
rte-fltr-in#<n>
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
809
Information About TACACS+

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000