Cisco Catalyst 2960 Series User Manual

Document TitleRelated Topic
•
Cisco IOS Security Command Reference: Commands
A to C
•
Cisco IOS Security Command Reference: Commands
D to L
•
Cisco IOS Security Command Reference: Commands
M to R
•
Cisco IOS Security Command Reference: Commands
S to Z
Cisco security commands
Cisco IOS IPv6 Command Reference
IPv6 commands
Standards and RFCs
TitleStandard/RFC
RADIUS Change of Authorization (CoA) extensionsRFC 5176
Error Message Decoder
LinkDescription
https://www.cisco.com/cgi-bin/Support/Errordecoder/
index.cgi
To help you research and resolve system error
messages in this release, use the Error Message
Decoder tool.
MIBs
MIBs LinkMIB
To locate and download MIBs for selected platforms,
Cisco IOS releases, and feature sets, use Cisco MIB
Locator found at the following URL:
http://www.cisco.com/go/mibs
All supported MIBs for this release.
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
943
Additional References for RADIUS

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000