Cisco Catalyst 2960 Series User Manual

This Tcl command extension will block waiting for the device prompt to show up in the contents read.Note
cli_read_drain
Reads and drains the command output of the specified command-line interface (CLI) channel handler. Returns
all the contents read.
Syntax
cli_read_drain fd
Arguments
(Mandatory) The CLI channel handler.fd
Result String
All the contents read.
Set _cerrno
None
cli_read_line
Reads one line of the command output from the specified command-line interface (CLI) channel handler.
Returns the line read.
Syntax
cli_read_line fd
Arguments
(Mandatory) The CLI channel handler.fd
Result String
The line read.
Set _cerrno
None
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1853
cli_read_drain

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000