Cisco Catalyst 2960 Series User Manual

•
event_register_nf, page 1910
•
event_register_none, page 1914
•
event_register_oir, page 1916
•
event_register_process, page 1918
•
event_register_resource, page 1922
•
event_register_rf, page 1924
•
event_register_routing, page 1927
•
event_register_rpc, page 1930
•
event_register_snmp, page 1933
•
event_register_snmp_notification, page 1938
•
event_register_snmp_object, page 1941
•
event_register_syslog, page 1944
•
event_register_timer, page 1948
•
event_register_timer_subscriber, page 1953
•
event_register_track, page 1956
•
event_register_wdsysmon, page 1958
event_register_appl
Registers for an application event. Use this Tcl command extension to run a policy when an application event
is triggered following another policy’s execution of an event_publish Tcl command extension; the
event_publish command extension publishes an application event.
In order to register for an application event, a subsystem must be specified. Either a Tcl policy or the internal
Embedded Event Manager (EEM) API can publish an application event. If the event is being published by a
policy, the sub_system argument that is reserved for a policy is 798.
Syntax
event_register_appl [tag ?] sub_system ? type ? [queue_priority low|normal|high|last] [maxrun
?] [nice 0|1]
Arguments
(Optional) String identifying a tag that can be used
with the trigger Tcl command extension to support
multiple event statements within a Tcl script.
tag
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
1870
event_register_appl

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000