Cisco Catalyst 2960 Series

SUMMARY STEPS
1.
enable
2.
configure terminal
3.
vmps reconfirm minutes
4.
end
5.
show vmps
6.
copy running-config startup-config
DETAILED STEPS
PurposeCommand or Action
Enables privileged EXEC mode. Enter your password if
prompted.
enable
Example:
Switch> enable
Step 1
Enters the global configuration mode.configure terminal
Example:
Switch# configure terminal
Step 2
Sets the number of minutes between reconfirmations of the
dynamic VLAN membership. The range is 1 to 120. The
default is 60 minutes.
vmps reconfirm minutes
Example:
Switch(config)# vmps reconfirm 90
Step 3
Returns to privileged EXEC mode.end
Example:
Switch(config)# end
Step 4
Verifies the dynamic VLAN reconfirmation status in the
Reconfirm Interval field of the display.
show vmps
Example:
Switch# show vmps
Step 5
(Optional) Saves your entries in the configuration file.copy running-config startup-config
Example:
Switch# copy running-config startup-config
Step 6
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
2159
How to Configure VMPS