Cisco Catalyst 2960 Series - Page 48

Example: Creating an ACL and a VLAN Map to Deny a Packet 1257
Example: Creating an ACL and a VLAN Map to Permit a Packet 1258
Example: Default Action of Dropping IP Packets and Forwarding MAC Packets 1258
Example: Default Action of Dropping MAC Packets and Forwarding IP Packets 1259
Example: Default Action of Dropping All Packets 1259
Configuration Examples for Using VLAN Maps in Your Network 1260
Example: Wiring Closet Configuration 1260
Example: Restricting Access to a Server on Another VLAN 1261
Example: Denying Access to a Server on Another VLAN 1261
Configuration Examples of Router ACLs and VLAN Maps Applied to VLANs 1262
Example: ACLs and Switched Packets 1262
Example: ACLs and Bridged Packets 1262
Example: ACLs and Routed Packets 1263
Example: ACLs and Multicast Packets 1264
CHAPTER 55 Configuring DHCP 1265
Finding Feature Information 1265
Information About DHCP 1265
DHCP Server 1265
DHCP Relay Agent 1265
DHCP Snooping 1266
Option-82 Data Insertion 1267
Cisco IOS DHCP Server Database 1270
DHCP Snooping Binding Database 1270
DHCP Snooping and Switch Stacks 1272
How to Configure DHCP Features 1272
Default DHCP Snooping Configuration 1272
DHCP Snooping Configuration Guidelines 1273
Configuring the DHCP Server 1273
DHCP Server and Switch Stacks 1273
Configuring the DHCP Relay Agent 1273
Specifying the Packet Forwarding Address 1275
Prerequisites for Configuring DHCP Snooping and Option 82 1277
Enabling DHCP Snooping and Option 82 1278
Enabling the Cisco IOS DHCP Server Database 1282
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
xlviii
Contents