Cisco Catalyst 2960 Series - Page 50

Limiting the Rate of Incoming ARP Packets 1311
Performing Dynamic ARP Inspection Validation Checks 1313
Monitoring DAI 1315
Verifying the DAI Configuration 1316
Additional References 1316
CHAPTER 58 Configuring IEEE 802.1x Port-Based Authentication 1319
Finding Feature Information 1319
Information About 802.1x Port-Based Authentication 1319
Port-Based Authentication Process 1320
Port-Based Authentication Initiation and Message Exchange 1322
Authentication Manager for Port-Based Authentication 1323
Port-Based Authentication Methods 1323
Per-User ACLs and Filter-Ids 1324
Port-Based Authentication Manager CLI Commands 1325
Ports in Authorized and Unauthorized States 1326
Port-Based Authentication and Switch Stacks 1327
802.1x Host Mode 1328
802.1x Multiple Authentication Mode 1328
Multi-auth Per User VLAN assignment 1329
Limitation in Multi-auth Per User VLAN assignment 1330
MAC Move 1331
MAC Replace 1331
802.1x Accounting 1332
802.1x Accounting Attribute-Value Pairs 1332
802.1x Readiness Check 1333
Switch-to-RADIUS-Server Communication 1333
802.1x Authentication with VLAN Assignment 1334
802.1x Authentication with Per-User ACLs 1335
802.1x Authentication with Downloadable ACLs and Redirect URLs 1336
Cisco Secure ACS and Attribute-Value Pairs for the Redirect URL 1338
Cisco Secure ACS and Attribute-Value Pairs for Downloadable ACLs 1338
VLAN ID-based MAC Authentication 1339
802.1x Authentication with Guest VLAN 1339
802.1x Authentication with Restricted VLAN 1340
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
l
Contents