Cisco Catalyst 2960 Series

Default System Message Logging Settings 1599
Syslog Message Limits 1599
How to Configure System Message Logs 1600
Setting the Message Display Destination Device 1600
Synchronizing Log Messages 1601
Disabling Message Logging 1603
Enabling and Disabling Time Stamps on Log Messages 1604
Enabling and Disabling Sequence Numbers in Log Messages 1605
Defining the Message Severity Level 1606
Limiting Syslog Messages Sent to the History Table and to SNMP 1607
Logging Messages to a UNIX Syslog Daemon 1608
Monitoring and Maintaining System Message Logs 1609
Monitoring Configuration Archive Logs 1609
Configuration Examples for System Message Logs 1609
Example: Switch System Message 1609
Examples: Displaying Service Timestamps Log 1610
Additional References for System Message Logs 1610
Feature History and Information For System Message Logs 1611
CHAPTER 68 Configuring Online Diagnostics 1613
Information About Configuring Online Diagnostics 1613
Online Diagnostics 1613
How to Configure Online Diagnostics 1614
Starting Online Diagnostic Tests 1614
Configuring Online Diagnostics 1614
Scheduling Online Diagnostics 1614
Configuring Health-Monitoring Diagnostics 1615
Monitoring and Maintaining Online Diagnostics 1618
Displaying Online Diagnostic Tests and Test Results 1618
Configuration Examples for Online Diagnostic Tests 1619
Starting Online Diagnostic Tests 1619
Example: Configure a Health Monitoring Test 1620
Examples: Schedule Diagnostic Test 1620
Displaying Online Diagnostics: Examples 1620
Additional References for Online Diagnostics 1622
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
lxi
Contents