Cisco Catalyst 2960 Series

Redirecting Debug and Error Message Output 1645
Using the show platform forward Command 1645
Configuring OBFL 1646
Verifying Troubleshooting of the Software Configuration 1646
Displaying OBFL Information 1646
Example: Verifying the Problem and Cause for High CPU Utilization 1648
Scenarios for Troubleshooting the Software Configuration 1650
Scenarios to Troubleshoot Power over Ethernet (PoE) 1650
Configuration Examples for Troubleshooting Software 1652
Example: Pinging an IP Host 1652
Example: Performing a Traceroute to an IP Host 1653
Example: Enabling All System Diagnostics 1654
Additional References for Troubleshooting Software Configuration 1655
Feature History and Information for Troubleshooting Software Configuration 1656
PART XI Embedded Event Manager 1657
CHAPTER 70 Embedded Event Manager Overview 1659
Finding Feature Information 1659
Information About Embedded Event Manager 1659
Embedded Event Manager 1659
Embedded Event Manager 1.0 1661
Embedded Event Manager 2.0 1661
Embedded Event Manager 2.1 1661
Embedded Event Manager 2.1 (Software Modularity) 1662
Embedded Event Manager 2.2 1662
Embedded Event Manager 2.3 1663
Embedded Event Manager 2.4 1663
Embedded Event Manager 3.0 1664
Embedded Event Manager 3.1 1665
Embedded Event Manager 3.2 1666
Embedded Event Manager 4.0 1666
EEM Event Detectors Available by Cisco IOS Release 1667
Event Detectors 1669
EEM Actions Available by Cisco IOS Release 1673
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
lxiii
Contents