Cisco Catalyst 2960 Series

Verifying Pending EEM Policies 1719
Configuring EEM Applet (Interactive CLI) Support 1720
Reading and Writing Input from the Active Console for Synchronous EEM
Applets 1720
Reading Input from the Active Console 1720
Writing Input to the Active Console 1722
Configuring SNMP Library Extensions 1724
Prerequisites 1724
SNMP Get and Set Operations 1724
SNMP Get Operation 1724
GetID Operation 1724
SNMP Set Operation 1725
SNMP Traps and Inform Requests 1726
Configuring EEM Applet for SNMP Get and Set Operations 1726
Configuring EEM Applet for SNMP OID Notifications 1729
Configuring Variable Logic for EEM Applets 1732
Prerequisites 1733
Configuring Variable Logic for EEM Applets 1733
Specifying a Loop of Conditional Blocks 1733
Specifying if else Conditional Blocks 1734
Specifying foreach Iterating Statements 1736
Using Regular Expressions 1738
Incrementing the Values of Variables 1739
Configuring Event SNMP Object 1740
Disabling AAA Authorization 1742
Configuring Description of an Embedded Event Manager Applet 1743
Configuration Examples for Writing Embedded Event Manager Policies Using Tcl 1744
Embedded Event Manager Applet Configuration Examples 1744
Configuration Examples for Embedded Event Manager Applet 1749
Example Identity Event Detector 1749
Example MAT Event Detector 1749
Example Neighbor-Discovery Event Detector 1749
Embedded Event Manager Manual Policy Execution Examples 1749
Embedded Event Manager Watchdog System Monitor (Cisco IOS) Event Detector
Configuration Example 1750
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
lxv
Contents