Enabling the VTP Version 2097
Enabling VTP Pruning 2099
Configuring VTP on a Per-Port Basis 2100
Adding a VTP Client Switch to a VTP Domain 2102
Monitoring VTP 2104
Configuration Examples for VTP 2105
Example: Configuring a Switch as the Primary Server 2105
Example: Configuring Switch as VTP Server 2105
Example: Enabling VTP on the Interface 2106
Example: Creating the VTP Password 2106
Where to Go Next 2106
Additional References 2106
Feature History and Information for VTP 2107
CHAPTER 86
Configuring VLANs 2109
Finding Feature Information 2109
Prerequisites for VLANs 2109
Restrictions for VLANs 2110
Information About VLANs 2110
Logical Networks 2110
Supported VLANs 2111
VLAN Port Membership Modes 2111
VLAN Configuration Files 2112
Normal-Range VLAN Configuration Guidelines 2113
Extended-Range VLAN Configuration Guidelines 2114
Default VLAN Configurations 2115
Default Ethernet VLAN Configuration 2115
Default VLAN Configuration 2116
How to Configure VLANs 2116
How to Configure Normal-Range VLANs 2116
Creating or Modifying an Ethernet VLAN 2117
Deleting a VLAN 2119
Assigning Static-Access Ports to a VLAN 2121
How to Configure Extended-Range VLANs 2122
Creating an Extended-Range VLAN 2122
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
lxxiv
Contents
To Next Page
Loading...
