Allied Telesis AlliedWare Plus - Page 2656

C613-50100-01 REV C Command Reference for x930 Series 2656
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
ALLIED TELESIS MANAGEMENT FRAMEWORK™ (AMF) COMMANDS
SHOW
ATMF LINKS DETAIL
Table 63: Parameter definitions from the show atmf links detail command output
Parameter Definition
Crosslink Ports
Information
Show details of all Crosslink ports on this Node:
• Port - Name of the Port or static aggregation (sa<*>).
•Ifindex - Interface index for the crosslink port.
• VR ID - Virtual router id for the crosslink port.
• Port Status - Status of the local port on the Node as UP or DOWN.
• Port State - AMF State of the local port.
– Init - Link is down.
– Hold - Link transitioned to up state, but waiting for hold period to ensure
link is stable.
– Incompatible - Neighbor rejected the link because of inconsistency in
AMF configurations.
– OneWay - Link is up and has waited the hold down period and now
attempting to link to
– another unit in another domain
– Full - Link hello packets are sent and received from its neighbor with its
own node id.
– Shutdown - Link has been shut down by user configuration.
Port BPDU Receive Count - The number of AMF protocol PDU's received.
• Adjacent Node Name - The name of the adjacent node connected to this
node.
• Adjacent Ifindex - Adjacent AMF Node connected to this Node.
• Adjacent VR ID - Virtual router id of the adjacent node in the domain.
• Adjacent MAC - MAC address of the adjacent node in the domain.
• Port Last Message Response - Response from the remote neighbor to our
AMF last hello packet.
Link State Entries Shows all the link state database entries:
• Node.Ifindex - Shows adjacent Node names and Interface index.
• Transaction ID - Shows transaction id of the current crosslink transaction.
• MAC Address - Shows adjacent Node MAC addresses.
• Link State - Shows AMF states of adjacent nodes on the link.
Domain Nodes Tree Shows all the nodes in the domain:
• Node - Name of the node in the domain.
• Links on Node - Number of crosslinks on a vertex/node.
• Link no - Shows adjacent Node names and Interface index.
• Forwarding State - Shows state of AMF link Forwarding/Blocking.
Crosslink
Transaction Entries
Shows all the transaction entries:
• Node - Name of the AMF node.
• Transaction ID - transaction id of the node.
• Uplink Transaction ID - transaction id of the remote node.