C613-50100-01 REV C Command Reference for x930 Series 3013
AlliedWare Plus™ Operating System - Version 5.4.6-1.x
TRIGGER COMMANDS
SHOW
TRIGGER
Table 3: Example output from the show trigger full command
awplus#show trigger full
Trigger Configuration Details
------------------------------------------------------------
Trigger ..................... 1
Description ................. <no description>
Type and details ............ Card (in)
Days ........................ smtwtfs
After ....................... 00:00:00
Before ...................... 23:59:59
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Tue Oct 25 14:43:50 2016
Number of activations ....... 0
Last activation ............. not activated
Number of scripts ........... 0
1. <not configured>
2. <not configured>
3. <not configured>
4. <not configured>
5. <not configured>
Trigger ..................... 2
Description ................. <no description>
Type and details ............ Card (out)
Days ........................ smtwtfs
After ....................... 00:00:00
Before ...................... 23:59:59
Active ...................... Yes
Test ........................ No
Trap ........................ Yes
Repeat ...................... Continuous
Modified .................... Tue Oct 25 14:45:56 2016
Number of activations ....... 0
Last activation ............. not activated
Number of scripts ........... 0
1. <not configured>
2. <not configured>
3. <not configured>
4. <not configured>
5. <not configured>
Table 4: Parameters in the output of the show trigger full and show trigger
commands for a specific trigger
Parameter Description
Trigger The ID of the trigger.
Description Descriptive name of the trigger.