Cisco Catalyst 2960 Series User Manual

CHAPTER 5 Configuring LLDP, LLDP-MED, and Wired Location Service 57
Finding Feature Information 57
LLDP, LLDP-MED, and Wired Location Service Overview 57
LLDP 57
LLDP Supported TLVs 58
LLDP and Cisco Switch Stacks 58
LLDP and Cisco Medianet 58
LLDP-MED 58
LLDP-MED Supported TLVs 58
Wired Location Service 60
Default LLDP Configuration 61
Restrictions for LLDP 61
How to Configure LLDP, LLDP-MED, and Wired Location Service 62
Enabling LLDP 62
Configuring LLDP Characteristics 63
Configuring LLDP-MED TLVs 65
Configuring Network-Policy TLV 67
Configuring Location TLV and Wired Location Service 70
Enabling Wired Location Service on the Switch 72
Configuration Examples for LLDP, LLDP-MED, and Wired Location Service 74
Configuring Network-Policy TLV: Examples 74
Monitoring and Maintaining LLDP, LLDP-MED, and Wired Location Service 74
Additional References for LLDP, LLDP-MED, and Wired Location Service 75
Feature Information for LLDP, LLDP-MED, and Wired Location Service 76
CHAPTER 6 Configuring System MTU 77
Finding Feature Information 77
Information about the MTU 77
System MTU Guidelines 78
How to Configure MTU 78
Configuring the System MTU 78
Configuration Examples for System MTU 79
Additional References for System MTU 80
Feature Information for System MTU 80
Consolidated Platform Configuration Guide, Cisco IOS Release 15.2(4)E (Catalyst 2960-X Switches)
vi
Contents

Cisco Catalyst 2960 Series Specifications

General

Layer	Layer 2
Power over Ethernet (PoE)	Available on some models
RAM	128 MB
Flash Memory	32 MB
MAC Address Table Size	8000
Operating Temperature	0°C to 45°C (32 to 113°F)
Ports	24 or 48 x 10/100/1000