To Next Page

To Previous Page

Chapter 40: Diagnostics

STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide

11:42:14 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=23: testID=4.7:

testName=BCM1480 / MCC Loopback Test: timestamp=: result=Passed

11:46:07 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=36: testID=3.12:

testName=BCM5461 - Phy 0 Function Test: timestamp=: result=Passed

11:46:17 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=37: testID=3.7:

testName=BCM5461 - Phy 1 Register Test: timestamp=: result=Passed

11:46:28 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=38: testID=3.12:

testName=BCM5461 - Phy 1 Function Test: timestamp=: result=Passed

11:46:38 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=39: testID=3.7:

testName=BCM5461 - Phy 4 Register Test: timestamp=: result=Passed

11:46:48 19 info: <DIAG> DiagnosticControllerCard: Test Done: testCnt=40: testID=3.12:

testName=BCM5461 - Phy 4 Function Test: timestamp=: result=Passed

11:46:58 19 info: <DIAG> DiagnosticControllerCard: Cmd Done: cmd=configure diag 5 : Timestamp=THU

APR 14 11:46:58 2008

11:46:58 19 info: <DIAG> Slot 11: Diagnostic test completed, status = Passed

11:46:58 19 notc: CLI command:(No Auth):10.5.7.166:configure diag 5

Diagnostic Failure and Recovery

Diagnostic failures generate error reports that isolate faults, and necessitate user action to expedite recovery.

Diagnostic Failure

When a module fails diagnostics, an error report is printed to the CLI console and to the log.

Error reports are similar to what is shown in the following examples:

------------------------------

Generating Function: BlockMemDiag::memTestAllBits

Result :Failed

Result Note :Memory integrity failure

Expected Result :0x29

Actual Result :0x00

XOR Exp vs Actual :0x29

Fault Location :0x0001.1e00; Physical Address: 0x0000.23c0

------------------------------

Slot 17: Test #9 - FLAK Memory Test (ID 2.22) Failed

Slot 17: Diagnostic test completed, status = Failed

Arris C4C User Manual

Questions and Answers: