Arris C4C - Configure Cable Load-Balance Rule Type

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1358
configure cable load-balance rule * type
Purpose
Sets the type of dynamic load balancing for a specified rule.
Default Access Level
15
Command Syntax
configure cable load-balance rule <1-4294967295> type {static | dynamic | bonded | both}
configure cable load-balance rule <1-4294967295> type [{static | dynamic | bonded | both}] no
Supplemental
Information
To return the type to the default value of both, use the no option.
Parameters
<1-4294967295>
Rule number
{static | dynamic |
bonded| both}
Type can be one of the following:
static Sets the rule to perform static load balancing only.
dynamic Sets the rule to perform dynamic load balancing only.
bonded Sets the rule to perform static, dynamic and bonded load balancing.
both Sets the rule to perform both static and dynamic load balancing.
Default value is both.
Related Commands
configure cable load-balance policy (page 1346)