Arris C4C - Configure Router Isis Distance Isis

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2453
configure router isis distance * isis
Purpose
Configures administrative distance for subsets of the IS-IS routes in the same VRF.
Default Access Level
15
Command Syntax
configure router isis distance <1-255> isis [external-level1 <int>] [external-level2 <int>]
[internal-level1 <int>] [internal-level2 <int>]
configure router isis distance <1-255> isis [external-level1 <int>] [external-level2 <int>]
[internal-level1 <int>] [internal-level2 <int>] no
Supplemental
Information
To remove the administrative distance for IS-IS routes, use the no option.
Parameters
<1-255>
Administrative distance for all IS-IS routes the same VFR
[external-level1
<int>]
Administrative distance for external level-1 IS-IS routes in the same VRF. Valid range is 1-255.
[external-level2
<int>]
Administrative distance for external level-2 IS-IS routes in the same VRF. Valid range is 1-255.
[internal-level1
<int>]
Administrative distance for internal level-1 IS-IS routes in the same VRF. Valid range is 1-255.
[internal-level2
<int>]
Administrative distance for internal level-2 IS-IS routes in the same VRF. Valid range is 1-255.