Arris C4C - Configure Service-Patch Value Description

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2526
configure service-patch * value * description
Purpose
Configure a parameter in the generic patch parameter table.
Default Access Level
15
Command Syntax
configure service-patch <1-1000> <word> value <value> description <word>
configure service-patch <1-1000> [<word>] [value <word>] [description <word>] no
Supplemental
Information
To disable, use the no command.
Parameters
<1-1000>
Parameter Index.
<word>
Parameter name.
<value>
Parameter value.
<word>
Description of the parameter.