Arris C4C - Configure Router Bgp Neighbor Remove-Private-As

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2411
configure router bgp * neighbor * remove-private-as
Purpose
Removes private Autonomous Systems (AS) from the autonomous system path.
Default Access Level
15
Command Syntax
configure router bgp [<int>] neighbor <ipv6> remove-private-as
configure router bgp [<int>] neighbor <ipv6> remove-private-as no
Supplemental
Information
To reestablish private AS on outbound updates, use the no option.
Parameters
[<int>]
Autonomous System (AS) number. Valid range is 1-65535
<ipv6>
IP address