Arris C4C User Manual

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1486
configure interface cable-downstream * cable voice-limits
Purpose
Sets the PacketCable CAC parameters for all downstream channels.
Default Access Level
15
Command Syntax
configure interface cable-downstream <slot/port> cable voice-limits <allowed-normal> <allowed-emergency>
<allowed-total> <reserved-emergency> <reserved-normal>
Supplemental
Information
N/A
Parameters
<slot>
The chassis slot in which the targeted downstream Cable Access Module resides. Valid range for the C4 CMTS is 0-15; valid range for
the C4c CMTS is 10-15.
<port>
The downstream port.
<allowed-normal>
Maximum percent downstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.
<allowed-
emergency>
Maximum percent downstream channel bandwidth allowed for emergency voice use. Valid range is 0 to 90.
<allowed-total>
Percent downstream bandwidth allowed for all classes of voice traffic. Valid range is 0 to 90.
<reserved-
emergency>
Minimum percent downstream channel bandwidth allowed for emergency voice use. Valid range is 0 to 90.
<reserved-normal>
Minimum percent downstream channel bandwidth allowed for normal voice use. Valid range is 0 to 90.

Arris C4C Specifications

General

Brand	Arris
Model	C4C
Category	Control Unit
Language	English