Arris C4C - Configure Route-Map Deny Match Ip Address Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2256
configure route-map * deny * match ip address prefix-list
Purpose
Configure conditions that deny routes that matches an IP address and denies routes based on destination network.
Default Access Level
15
Command Syntax
configure route-map <word> deny [<int>] match ip address [<int>] prefix-list <word>
configure route-map <word> deny [<int>] match ip address [prefix-list <word>] no
Supplemental
Information
Standard access-lists are not presently supported. Users desiring to filter on a standard access-list must manually convert the access-
list to a prefix-list and apply the prefix-list.
To disable this function, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Matches a BGP community
[<int>]
Standard access-list number. Valid range is 1-99
<word>
Prefix list name