Arris C4C - Configure Interface Cable-Mac;Cable CM-Status Event-Type Enabled

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1506
configure interface cable-mac * cable cm-status event-type * enabled
Purpose
Configures an event type for which the status can be reported via the CM-STATUS message.
Default Access Level
15
Command Syntax
configure interface cable-mac <mac> cable cm-status event-type <all|type> enabled
configure interface cable-mac <mac> cable cm-status event-type <all|type> enabled no
Supplemental
Information
To disable the CM-Status Event reporting mechanism, use the no option.
Parameters
<mac>
The MAC identifier. Valid numbers are 0-415.
<all>
Includes all event types
<type>
Select from the following event condition types:
secondaryChlMddTimeout
qamFecLockFailure
seqOutOfRange
mddRecovery
qamFecLockRecovery
t4Timeout
t3RetriesExceeded
t3RangingRecovery
cmOnBatteryBackup
cmAcPowerRestored
all