Arris C4C - Configure Cable Spectrum-Group Trigger Period

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1436
configure cable spectrum-group trigger * period
Purpose
Creates a periodic trigger.
Default Access Level
15
Command Syntax
configure cable spectrum-group trigger <trigger_id> period <per_time>
configure cable spectrum-group trigger <trigger_id> period <per_time> no
Supplemental
Information
To delete the periodic trigger, use the no option.
Parameters
<trigger_id>
The trigger number and has values of 1-64
<per_time>
The period of time before the trigger fires in seconds and has values from 1 to 604,800 (one week).