Arris C4C - Configure Interface Gigabitethernet Isis Wide-Metric

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1830
configure interface gigabitethernet * isis wide-metric
Purpose
Allows wide metrics for the specified interface.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis wide-metric <1-16777215> [<level-1 |
level-2>]
configure interface gigabitethernet <slot>/<port>[.<0-254>] isis wide-metric [<level-1 | level-2>] no
Supplemental
Information
This applies when a system has IPv4 and IPv6 configuration.
To restore the default value, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<1-16777215>
Metric value
[<level1 | level2>]
Specifies the type of adjacencies to be formed on this interface. If no value is specified, then modify value for both level-1 and level-
2.