Arris C4C - Show Cable Load-Balance Channels

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2660
show cable load-balance channels
Purpose
Displays the channel load data for the Upstream Cable Access Modem (UCAM).
Default Access Level
1
Command Syntax
show cable load-balance channels [slot <int>] [fiber-node <word>] [group <int>] [detail]
Supplemental
Information
N/A
Parameters
[slot <int>]
Slot number of the CAM with upstream interfaces. Valid range for the C4 CMTS is 0-15; valid range for the C4c CMTS is 10-15.
[fiber-node <word>]
Filters output on the fiber node name.
[group <int>]
Filters output on the group.
[detail]
Displays additional columns in the output.