Arris C4C - Configure Router Isis Address-Family Ipv4 Summary-Address

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2440
configure router isis address-family ipv4 summary-address
Purpose
Changes aggregate addresses.
Default Access Level
15
Command Syntax
configure router isis address-family ipv4 summary-address <A.B.C.D> <A.B.C.D> [metric <int>] [wide-
metric <int>]
configure router isis address-family ipv4 summary-address <A.B.C.D> <A.B.C.D> [metric <int>] [wide-
metric <int>] no
Supplemental
Information
To remove, use the no option.
Parameters
<A.B.C.D>
Summary IP address
<A.B.C.D>
Summary mask
[metric <int>]
Metric value. Valid range is 1-63 for this summary address
[wide-metric <int>]
Wide-metric value. Valid range is <1-6777214 for this summary address