Arris C4C - Configure Route-Map Match Ip Address Prefix-List

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2265
configure route-map * match ip address prefix-list
Purpose
Distributes any routes that have a destination network number address that is permitted by a standard access list, an extended
access list, or a prefix list, or to perform policy routing on packets.
Default Access Level
15
Command Syntax
configure route-map <word> match ip address [prefix-list <word>
configure route-map <word> match ip address prefix-list <word>] no
Supplemental
Information
To remove the entry, use the no option.
Parameters
[<int>]
Destination network IP address
<word>
Prefix list name