Arris C4C - Configure L2 Vpn CM Capability

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2165
configure l2vpn cm capability
Purpose
Permits the legacy CMs to register with L2VPN TLV encodings.
Default Access Level
15
Command Syntax
configure l2vpn cm capability {esafe-ident|dut-filter} {required|optional}
configure l2vpn cm capability {esafe-ident|dut-filter} {required|optional} no
Supplemental
Information
Note: If neither capability is identified, then both esafe-ident and dut-filter will be set.
The default for each capability is required.
Legacy CMs may register with L2VPN TLV encodings only if both esafe-ident and dut-filter are explicitly set to optional.
Parameters
{esafe-ident |
Indicates whether TLVs that identify CMs as embedded devices are required.
dut-filter}
Indicates whether an L2VPN-forwarding CM is required to be capable of Downstream Unencrypted Traffic (DUT) filtering.
{required |
LVPN-compliant CMs are required.
optional}
Legacy CMs are allowed to register without L2VPN TLVs.