Arris C4C - Configure Snmp-Server View

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2558
configure snmp-server view
Purpose
Configures the SNMP view.
Default Access Level
15
Command Syntax
configure snmp-server view <view_name> <OID tree> <included | excluded>
configure snmp-server view <view_name> <OID tree> [<included | excluded>] no
Supplemental
Information
To remove the SNMP view, use the no option.
Parameters
<view_name>
Name of view
<OID tree>
The object identifier (OID) tree
<included |
excluded>
View is included or excluded