Arris C4C - Configure Interface Tengigabitethernet Ipv6 Icmp Too-Big

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2015
configure interface tengigabitethernet * ipv6 icmp too-big
Purpose
Enables transmission of ICMP6 too big messages.
Default Access Level
15
Command Syntax
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 icmp too-big
configure interface tengigabitethernet <slot>/<port>[.<0-254>] ipv6 icmp too-big no
Supplemental
Information
To disable, use the no option.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/tengigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<10>[.<0-254>]
Valid range for the C4c CMTS is <17>/<10>[.<0-254>]