Arris C4C - Configure Route-Map Permit Set Origin

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 2292
configure route-map * permit * set origin
Purpose
Sets the BGP origin code.
Default Access Level
15
Command Syntax
configure route-map <word> permit [<int>] set origin <egp | igp | incomplete>
configure route-map <word> permit [<int>] set origin [<egp | igp | incomplete>] no
Supplemental
Information
To return to the default setting, use the no option.
Parameters
<word>
Name of this route-map
[<int>]
Sequence number
<egp | igp |
incomplete>
BGP origin code: egp = remote EGP; igp = local EGP; incomplete = unknown heritage.