Arris C4C - Configure Interface Cable-Downstream;Voice-Limits Reserved-Normal

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1492
configure interface cable-downstream * cable voice-limits reserved-normal
Purpose
Defines maximum percentage of the downstream channel bandwidth reserved for normal voice use.
Default Access Level
15
Command Syntax
configure interface cable-downstream <slot/port> cable voice-limits reserved-normal <percent>
Supplemental
Information
Bandwidth is expressed in terms of data throughput and is a function of channel width and compression technique. Allowed-total
should be equal to allowed-emergency. Voice traffic is not recommended on 320 or 640 Kbps channels.
Recommended Settings:
Channel BW allowed-normal allowed-emergency
1.28 Mbps 55% 75%
2.56 Mbps 75% 85%
5.12 Mbps 85% 90%
10.24 Mbps 90% 90%
Parameters
<slot>
The chassis slot in which the targeted downstream Cable Access Module resides. Valid range for the C4 CMTS is 0-15; valid range for
the C4c CMTS is 10-15.
<port>
The downstream port.
<percent>
The percentage of bandwidth to be used. Valid range is 0 to 90.