Arris C4C - Сonfigure Interface Gigabitethernet Ip Igmp Robustness

Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1749
configure interface gigabitethernet * ip igmp robustness
Purpose
Sets the robustness.
Default Access Level
15
Command Syntax
configure interface gigabitethernet <slot>/<port>[.<0-254>] ip igmp robustness <robustness>
configure interface gigabitethernet <slo>t/<port>[.<0-254>] ip igmp robustness [<robustness>] no
Supplemental
Information
To reset the robustness, use the no version.
Parameters
<slot>/<port>[.<0-
254>]
RCM slot number/gigabitEthernet port number[.subinterface number].
Valid range for the C4 CMTS is <17-18>/<0-9>[.<0-254>]
Valid range for the C4c CMTS is <17>/<0-9>[.<0-254>]
<robustness>
Defines the number of messages lost tolerance level. The valid range of values is 1 to 255. Default is set at 2.