Chapter 46: Command Line Descriptions
STANDARD Revision 1.0 C4® CMTS Release 8.3 User Guide
© 2016 ARRIS Enterprises LLC. All Rights Reserved. 1544
configure interface cable-mac * cable privacy default-cert-trust
Provides the ability to set the trust of all new self signed CA certificates to trusted.
configure interface cable-mac <mac> cable privacy default-cert-trust <trusted|untrusted>
configure interface cable-mac <mac> cable privacy default-cert-trust <trusted|untrusted> no
This command is provided mainly for testing purposes. For normal operation, the default cert trust should be set to untrusted. To
default all self-signed CA certificates to untrusted, use the no option.
Note: This command only applies to "new" certificates learned or provisioned in the C4 CMTS. Current self signed certificates will
not automatically have their trust state re-evaluated. To cause the current certificate default cert trust to be re-evaluated, they must
be deleted and relearned or reconfigured.
To set the default cert trust setting to default, (untrusted), the no option of this command can be used.
CAUTION: Self-signed certificates are a security risk. As a general rule, do not trust them.
Parameters
The MAC identifier. Valid numbers are 0-415.
Allows all new self-signed CA certificates to be trusted.
Does not allow all new self-signed CA certificates to be trusted. The default is untrusted.
To Next Page
Loading...